|
MSRP: $6100
SoCal HiFi Price: $3600
Interested? Send an email to support@socalhifi.com!
For Sale: McIntosh MHT-200 (MHT200) in very good condition with manual, remote and original box.
The MHT200 combines the flexibility of a premium home theater processor and the power of eight individual amplifiers all in a single component. With switching provided for Component Video, S-Video and Composite Video and eight analog and six digital audio inputs, you won’t outgrow the MHT200 anytime soon!
Processing formats include DTS; DTS ES; DTS Neo: 6; Dolby Digital; Dolby Digital EX and Dolby ProLogic II. Each of the eight-monoblock amplifiers provides 140 watts of power to easily meet the demands of dynamic home theater sound while also providing built-in amplifiers for a second zone of audio. Imagine…six channels effortlessly powering your home theater while the other two channels let you listen to a different source (like a CD) in another room!
The MHT200 also provides an expansion slot for an optional highperformance AM/FM stereo tuner. Have your dealer install the optional tuner module and enjoy the AM/FM quality McIntosh is famous for.
---SPECIFICATIONS---
PERFORMANCE SPECIFICATIONS
PREAMP SECTION
FREQUENCY RESPONSE
(L/C/R/LS/RS/LB/RB)
+/-0.5dB from 20Hz – 20kHz
(Sub)
+/-0.5dB from 20Hz – 140Hz
This channel has an electronic low pass filter with an 80Hz corner frequency and 24dB per octave roll off in all modes except external.
OUTPUT IMPEDANCE:
Less than 560 ohms all channels
MAXIMUM VOLTAGE OUTPUT:
8V
TOTAL HARMONIC DISTORTION:
All channels, 0.05% from
20Hz to 20kHz
SENSITIVITY:
Line Level: 100mV IHF
Dolby Level: 200mV input
External Input: 200mV for 2.0Vrms
A-WEIGHTED SIGNAL-TO-NOISE RATIO:
All outputs greater than 90dB
below reference level.
MAXIMUM INPUT SIGNAL:
Analog Input: 6Vrms
POWER AMPLIFIER SECTION
POWER OUTPUT ZONE A:
Minimum sine wave continuous
average power output per channel
with specified number of channels
operating is:
Rated Power Band (80Hz to 20kHz) into a 4 ohm load:
2 x 160 watts
3 x 140 watts
5 x 130 watts
6 x 120 watts
POWER OUTPUT ZONE B:
Minimum sine wave continuous average power output per channel with both channels operating is:
Rated Power Band (20Hz to 20kHz) into a 4 ohm load:
2 x 150 watts
OUTPUT LOAD IMPEDANCE:
4 to 8 ohms.
RATED POWER BAND:
20Hz to 20kHz
TOTAL HARMONIC DISTORTION:
0.05% maximum harmonic distortion at any power level from 250 milliwatts to rated power per channel.
FREQUENCY RESPONSE:
+0, -0.25dB from 20Hz to 20kHz
+0, -3.0dB from 10Hz to 100kHz
SENSITIVITY:
1.0V
A-WEIGHTED SIGNAL-TO-NOISE RATIO:
92dB (112dB below rated output)
INTERMODULATION DISTORTION:
0.05% maximum if instantaneous peak output does not exceed twice the output rating per channel.
OVERALL DIMENSIONS (H x W x D includes knobs and feet)
9-7/16" (23.97cm) x 17-3/4"
(45.09cm) x 20-1/8" (51.16cm)
WEIGHT:
73 lbs. (33.1Kg) net
87 lbs. (39.5Kg) boxed
|