|
|
MSRP: $3000
Price: $500 - SOLD!!!
Series 1, Version 2.03 with XLR and component video outputs. Great pre-amp/processor for the money!
Conservatively rated 8/10 due to scratch on top of unit, very small scratch under screen (see pic, hard to photo) and remote is missing battery cover.
Local pick-up preferred because I don't have the original box, but willing to ship at buyer's expense. Willing to offer discount if buyer also buys matching B&K Reference 200.7 amplifier (see other listings).
Willing to demo unit for local buyers.
Audio & Video Specifications
Frequency Response: 5 Hz - 20 kHz, +0 / -0.5dB Frequency Response: 20 Hz - 10 MHz ±3dB
Input Sensitivity: 2 V in, 1.5 V out (0dB) Maximum Input Level: 2 V P-P
Maximum Output Level: 3 / 6 V Unbal / Bal Maximum Output Level: 2 V P-P
Signal to Noise Ratio: 98 dB CCIR 2 k Weighted
Input Impedance: 50 k Ohms Input Impedance: 75 Ohms
Output Impedance: 221 Ohms Output Impedance: 75 Ohms
Noise Test Reference Level: 46 mV Composite Video Inputs 7
Surround Outputs 8 Unbalanced, 8 Balanced Composite Video Outputs 5
Audio Analog Inputs 7 Unbalanced, 2 Balanced SVHS Video Inputs 7
Audio Analog Outputs 4 SVHS Video Outputs 5
Multi Channel Input 5.1 format
Digital Inputs coax/optical 6/5 Component Video Inputs 3
Digital Outputs coax/optical 1/1 (Zone 1), 0/1 (Zone 2) Component Video Outputs 1
High/Low Pass Crossover Fc Adjustable 20-200 Hz
High Pass Crossover Slope 6 or 12 dB/Oct
Low Pass Crossover Slope 6, 12 or 24 dB/Oct
Tuner Specifications FM Section Tuner Specifications AM section
Frequency Range: 87.5 - 107.9 MHz Frequency Range: 520 - 1670 kHz
Total Harmonic Distortion: Less than 0.25% Total Harmonic Distortion: Less than 0.3%
Frequency Response 20 Hz - 15 kHz, +1/ -3 dB
Capture Ratio: 2 dB
IHF (Usable) Sensitivity: 12 dBf
Mono/Stereo Sensitivity: 15 / 35 dBf Sensitivity: 28 dBf
Alternate Channel Selectivity: 65 dB Selectivity: 30 dB
Signal to Noise Ratio: 70 dB, A Weighted
Antenna Input Impedance: 75 Ohms Antenna Input Impedance: 300 Ohms
Processor Specifications Miscellaneous
A/D Conversion 24 Bit 48/96kHz Line voltage: 120/220/240 VAC
D/A Conversion 24 Bit 32/44.1/48/96kHz Power consumption: 30 watts max
Dolby Digital/DTS DSP: Motorola 24 Bit 150 MIPS Replacement fuses: Line -.5 Amp/250 Volt
Dimensions: 17"(w)x10"(d)x5.25"(h)
Weight: 10 pounds
Upgradeability: A/D & D/A, DSP & digital receiver, IEEE1394
|
|
